Although Carbon Fiber is an expensive and “exotic” material, it’s maintenance doesn’t have to be. With a little caution and these simple procedures, you can keep your investment properly protected and looking like new.

Carbon Fiber Cleaning and Care:

General Precautions:

Be careful not to nick or deeply scratch the clear coat on the Carbon Fiber. This can lead to water intrusion which will damage the finish and the integrity of the Carbon Fiber.

The clear coat also protects the structure from dust, dirt, and damaging UV rays.

If a nick or deep scratch does occur, seal the damaged area thoroughly with a clear coat touch up or clear nail polish.


Carbon Fiber can be washed with any gentle cleanser or soap. If it is safe for the paint on your car, it will be safe for the Carbon Fiber.

In between washing, use a spray on detailer such as Chemical Guys Speed Wipe, available at

Dry with a soft microfiber towel to avoid scratches. Microfiber towels are available at


If needed, the surface can be polished by hand or with a buffing tool, to remove small scratches or haziness from oxidation.

Begin by using a clay bar to remove stubborn contaminates that are not easily removed by washing.

Use a 2500-3000 grit optical grade polish such as Chemical Guys V38. If necessary to remove deeper scratches, use a 2000-2500 grit optical grade polish such as Chemical Guys V36, or a 1500-2000 grit optical grade polish such as Chemical Guys V34.

Always start with the finer grit then move to a more aggressive polish if necessary.


To retain the UV resistance and protect the finish from the elements, apply a high-quality carnauba wax after cleaning, such as Chemical Guys 3X wax.


To make it easy, we have packaged all of these products together in one complete kit.

Proper service and repair procedures are vital to the safe, reliable operation of all motor vehicles
as well as the personal safety of those performing the repairs. Standard safety procedures and precautions (including use of safety goggles and proper tools and equipment) should be followed at all times to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise its safety.
Although this material has been prepared with the intent to provide reliable information, no warranty (express or implied) is made as to its accuracy or completeness. Neither is any liability assumed for loss or damage resulting from reliance on this material. SPECIFICALLY, NO WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER WARRANTY IS MADE OR TO BE IMPLIED WITH RESPECT TO THIS MATERIAL. In no event will ECS Tuning, Incorporated or its a liates be liable for any damages, direct or indirect, consequential or compensatory, arising out of the use of this material.